Difference between revisions of "Template:ETH-USB-HUB-HAT-manual"
(创建页面，内容为“===使用步骤=== *将ETH/USB HUB HAT插入到Raspberry Pi Zero/ Zero W的40PIN引脚上。 *将USB转接头连接模块的micro USB接口和树莓派的OTG接口…”) |
|||
| Line 1: | Line 1: | ||
| − | === | + | ===How to use it=== |
| − | * | + | *Insert the ETH/USB HUB HAT to Raspberry Pi. Connect USB interface of Raspberry Pi to micro USB interface of ETH/USB HUB HAT |
| − | * | + | *Connect Network cable to RJ45 interface of ETH/USB HUB HAT |
| − | * | + | *Power on Raspberry Pi. PWR indicator lights on and ACT indicator is flashing. Now you can check the network and USB ports |
| − | * | + | *When USB devices are connected to USB1~USB3 ports, related LED D1-D3 light on |
| − | + | ===Interfaces== | |
| − | === | + | *USB: USB interface, should be connected to USB port of Raspberry Pi |
| − | *USB: | + | *USB1 ~ USB3：Extended USB ports, can be connected to external USB devices |
| − | *USB1 ~ | + | *ETH：RJ45 port, can be connect to wired network |
| − | * | ||
Revision as of 16:34, 8 June 2020
How to use it
- Insert the ETH/USB HUB HAT to Raspberry Pi. Connect USB interface of Raspberry Pi to micro USB interface of ETH/USB HUB HAT
- Connect Network cable to RJ45 interface of ETH/USB HUB HAT
- Power on Raspberry Pi. PWR indicator lights on and ACT indicator is flashing. Now you can check the network and USB ports
- When USB devices are connected to USB1~USB3 ports, related LED D1-D3 light on
=Interfaces
- USB: USB interface, should be connected to USB port of Raspberry Pi
- USB1 ~ USB3：Extended USB ports, can be connected to external USB devices
- ETH：RJ45 port, can be connect to wired network
