ETH/USB HUB HAT

产品介绍

ETH/USB HUB HAT集成了以太网和USB集线器功能的树莓派扩展板,扩充了1个RJ45网口和3个USB口。 center|500px

产品特性

• 板载3个USB扩展口，兼容USB2.0/1.1传输
• 板载RTL8152B以太网芯片，引出RJ45网口，10/100M自适应
• 板载多个指示灯，方便查看电源、网口和USB扩展接口的工作状态
• 工作电压：5V

使用说明

How to use it

• Insert the ETH/USB HUB HAT to Raspberry Pi. Connect USB interface of Raspberry Pi to micro USB interface of ETH/USB HUB HAT
• Connect Network cable to RJ45 interface of ETH/USB HUB HAT
• Power on Raspberry Pi. PWR indicator lights on and ACT indicator is flashing. Now you can check the network and USB ports
• When USB devices are connected to USB1~USB3 ports, related LED D1-D3 light on

Interfaces

• USB: USB interface, should be connected to USB port of Raspberry Pi
• USB1 ~ USB3：Extended USB ports, can be connected to external USB devices
• ETH：RJ45 port, can be connect to wired network

资料

• 原理图