ETH/USB HUB HAT

From ingcool
Revision as of 11:15, 11 July 2020 by INKU-admin123 (talk | contribs) (Text replacement - "47.107.148.244" to "{{SERVERNAME}}")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Introduction

Ethernet / USB HUB HAT for Raspberry Pi, 1x RJ45 Ethernet Port, 3x USB Ports

ETHUSB HUB HAT wiki-1.jpg

Features

  • 3x USB ports, compatible with USB2.0/1.1
  • 1x RJ45 10/100M port, based on the RTL8152B Ethernet chip
  • Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port
  • Operating voltage:5V

User guide

How to use it

  • Insert the ETH/USB HUB HAT to Raspberry Pi. Connect USB interface of Raspberry Pi to micro USB interface of ETH/USB HUB HAT
  • Connect Network cable to RJ45 interface of ETH/USB HUB HAT
  • Power on Raspberry Pi. PWR indicator lights on and ACT indicator is flashing. Now you can check the network and USB ports
  • When USB devices are connected to USB1~USB3 ports, related LED D1-D3 light on

Interfaces

  • USB: USB interface, should be connected to USB port of Raspberry Pi
  • USB1 ~ USB3:Extended USB ports, can be connected to external USB devices
  • ETH:RJ45 port, can be connect to wired network

Resources