ETH/USB HUB HAT
Introduction
Ethernet / USB HUB HAT for Raspberry Pi, 1x RJ45 Ethernet Port, 3x USB Ports
产品特性
- 板载3个USB扩展口，兼容USB2.0/1.1传输
- 板载RTL8152B以太网芯片，引出RJ45网口，10/100M自适应
- 板载多个指示灯，方便查看电源、网口和USB扩展接口的工作状态
- 工作电压：5V
使用说明
How to use it
- Insert the ETH/USB HUB HAT to Raspberry Pi. Connect USB interface of Raspberry Pi to micro USB interface of ETH/USB HUB HAT
- Connect Network cable to RJ45 interface of ETH/USB HUB HAT
- Power on Raspberry Pi. PWR indicator lights on and ACT indicator is flashing. Now you can check the network and USB ports
- When USB devices are connected to USB1~USB3 ports, related LED D1-D3 light on
Interfaces
- USB: USB interface, should be connected to USB port of Raspberry Pi
- USB1 ~ USB3：Extended USB ports, can be connected to external USB devices
- ETH：RJ45 port, can be connect to wired network
